Low cost measurements of nitrogen and sulphur dry deposition velocities at a semi-alpine site: gradient measurements and a comparison with deposition model estimates

The conditional time averaged gradient method was used to measure air-surface exchange of nitrogen and sulphur compounds at a semi-alpine site in Southern Norway. Dry deposition velocities were then obtained from the bi-weekly concentration gradient measurements. Annual deposition velocities were found to be 1.4, 11.8 and 4.0 mm s(-1) for NH3, HNO3 and SO2, respectively, if all data were included, and to be 10.8, 11.8 and 13.0 mm s(-1), respectively, if only positive values were included. Measured deposition velocities were compared to two sets of values estimated from a big-leaf dry deposition module applying to two different land types (short grass and forbs, and tundra), driven by measured micrometeorological parameters. The deposition module gives reasonable values for this site throughout the year, but does not reproduce the large variability as shown in the measured data. No apparent seasonal variations were found from either measurements or module estimates due to the very low productivity of the studied area.     

水质总氮测定中的有关问题探讨

对总氮测定中的一系列影响因素，诸如实验用水，器皿的洗涤，实验室环境试剂的提纯、配制和保存，消解温度、压力和时间的控制，以及高氨氮水样中的总氮测定、总氮、总磷的同时测定和其他有关的问题，作了较为详细的探讨，并提出了相应的解决办法。     

热真空设备中与温度相关的试验技术探讨

以RZHM-1400-AB型热真空试验箱为实例,简述设备主要工作原理。强调其温度传递方式及航天产品在热真空试验中温度参数的重要性。以无数试验数据为依据,着重论证何种类型测温传感器与实际设备相匹配,同时论证选取何种外形的测温传感器为最佳温度测量工具。同时,进一步介绍几种在热真空试验中使用这些测温传感器的方法,以减少不必要的人为测量误差。     

Aircraft Emissions: A Comparison of Methodologies Based on Different Data Availability

The impact of air traffic on the global atmosphere is characterised by a high degree of uncertainty, concerning both the physico-chemical phenomena involved and the extent of the forcing due to anthropogenic emissions. The different effects of these emissions (e.g. on climate change, stratospheric ozone depletion, acidification, tropospheric ozone formation) are dealt with by different international bodies and conventions (e.g. IPCC, EMEP. . .) which are trying to define a standard methodology allowing countries to evaluate their contributions to global aircraft emissions and to report these figures in a standardised way. The paper compares different methodologies proposed by the joint EMEP/CORINAIR 'Atmospheric Emission Inventory Guidebook' for estimating aircraft emissions. Adjustments to these methodologies have been proposed, in order to integrate some additional data such as the total amount of flight hours per aircraft type or fuel consumption per trip. In case detailed information is not available, we recommend the use of a VERY SIMPLE methodology which may yield acceptable results, provided that every country makes adequate assumptions on the average aircraft type.     

高原机场飞机噪声监测与计算结果比较分析

高原机场飞机架次较少,机型单一,飞行周期稳定,以及高原特殊的环境特征,有时会导致现场实际噪声监测数据无效。应用综合噪声模型(INM)软件对青海玉树机场飞机噪声进行计算,其结果与监测结果比较显示,计算值和监测值误差在±6 d B的范围以内。探讨提出采用飞机噪声计算模式,可以为高原机场飞机噪声管理提供可靠技术支撑。     

城市轨道交通噪声的声源特性研究进展

分析了城市轨道交通噪声的主要类型、基本特性、传播规律及其影响因素;综述了国内外城市轨道交通噪声的预测及测量分析技术的研究成果,并对其进行了总结比较,阐述了各种方法的特点、主要成就和局限;最后探讨了城市轨道交通噪声领域今后的研究方向和发展趋势,为解决城市轨道交通发展中的噪声问题提供了参考.     

锶盐废渣含硫状态分析及硫含量的测定

锶盐废渣中硫的状态及含量不同其作用大不相同,有的呈现活性导致膨胀破坏,而有的则表现为惰性,因此有必要了解硫的存在状态及含量。分析表明锶盐废渣中硫主要以硫酸盐硫(SO3)和硫化物硫(S2-)两种形式存在。选择硫酸钡重量法和碘量法进行化学测定,然后用X-射线能谱仪进行元素定性分析;并将化学分析和仪器测定两种方法进行对比。结果表明,X-射线能谱法可以快捷、方便地探测锶渣所含各种元素,但不能确定元素的价态;化学分析方法可得到相对准确的元素含量;用硫酸钡重量法和碘量法联合测定锶渣中的硫含量,与X-射线能谱法相比,偏差仅为0.37%。     

作业疲劳测量方法对比研究

作业疲劳是导致生产效率下降、事故发生的重要原因之一。研究作业疲劳对提高生产效率、减少事故的发生,以及保护劳动者安全和健康具有重要意义。而作业疲劳测量方法是作业疲劳研究的前提和基础。因此,本文首先对作业疲劳的分类及其导致疲劳的原因进行了简单概述,并归纳总结了目前常用的几种作业疲劳测量方法,包括：主观感觉询问表评价法、生理参数测试法、生物化学测试法、心理学测试方法以及几种方法相结合的综合测试方法,并分析了上述几种作业疲劳测量方法的测量目的、适用范围、以及各自的优缺点,且针对不同研究目的提出了作业疲劳测量方法的选择和使用原则,并探讨了几个重点作业疲劳测量方法的研究方向,以及作业疲劳测量方法的完善方法。     

基于层次分析和模糊评价的民航客机雷击风险管理

雷击作为严重威胁飞行安全的一个重要危险源,对其采取科学的手段进行评估,进而采取措施进行缓解,对提高民航的安全水平有着重要的意义。首先介绍了雷暴现象及其危害,并介绍了风险管理的基本概念。然后探讨了层次分析法和模糊综合评价方法在雷击风险管理中的应用。按照层次分析法和模糊评价法的基本过程对调查所得的数据进行了处理,得到了雷击事件的风险值,并给出了风险缓解措施。文章给出的方法对航空公司运行中的其它危险源同样有借鉴意义。     

Designing a mixed performance measurement system for environmental supply chain management using evolutionary game theory and balanced scorecard: A case study of an auto industry supply chain

This paper proposes a mixed performance measurement system using a combination of evolutionary game theory and the balanced scorecard (BSC) in environmental supply chain management (ESCM) that measures and evaluates business operations using the four different perspectives of finance, customer, internal business process, and learning and growth. ESCM plays an important role in the supply chain which leads to the reduction, reuse and recycling of resources involved in both upstream and downstream activities. This paper presents guidance for practical managers in evaluating and measuring ESCM by developing a knowledge-based BSC and evolutionary game theory. The primary purpose of this paper is to apply the proposed method in a case study to one of Iran's biggest auto industry supply chain SAIPA Company. The results of this study indicate that the adoption of ESCM, in the absence of regulatory pressures and cost-saving measures is triggered by public pressures and its implementation is limited by organizational factors and strategic myopia.